D-Link DIR-825

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search

Jeepguy 1980 (Talk | contribs)
(New page: =='''FLASHING TO DD-WRT== # Download "factory-to-ddwrt_NA.bin." # Set your IPv4 network adapter to the following in your windows network configuration to: IP Address: 192.168.0.2, Subnet M...)
Next diff →

Revision as of 02:58, 10 September 2010

FLASHING TO DD-WRT

  1. Download "factory-to-ddwrt_NA.bin."
  2. Set your IPv4 network adapter to the following in your windows network configuration to: IP Address: 192.168.0.2, Subnet Mask: 255.255.255.0, Gateway: 192.168.0.1
  3. Physically connect the router ethernet port #1 to your computer ethernet port (NO WIRELESS!)
  4. Perform the 30/30/30 procedure:
    • With power on, hold the reset button down for 30 seconds .
    • Without releasing the reset button, unplug the router. Continue
      holding the reset button for 30 more seconds.
    • Without releasing the reset button, plug the power back in and
      continue to hold the reset button for 30 more seconds.
    • Release the reset button. The power light should be flashing on and off yellow.
  5. In Internet Explorer enter http://192.168.0.1
  6. You should see a screen titled "Firmware Upgrade System". Mine is version 1.0.0.2 dated 2008/12/25, yours may vary.
  7. Select the “factory-to-ddwrt_NA.bin" file you downloaded and click the Send button to flash your router. As the firmware is uploaded and installed you will see the screen start counting to 100 percent. The power light will remain out during this process. At 100% the power light the power light will flash yellow and the router will reboot. The router globe will be yellow, the power will be blue, the 2.4/5GHz will be flashing blue.
  8. Reconfigure your network adapter to one of the following:
    • STATIC IP Address: 192.168.1.2, Subnet Mask: 255.255.255.0, Gateway: 192.168.1.1
    • DHCP
  9. Using Internet Explorer go to: http://192.168.1.1 and You should see the DD-WRT screen to change your password.
  10. You should now be at the System Information screen.

RETURNING TO STOCK FIRMWARE

COMMON PROBLEMS