D-Link DIR-615 rev D2
From DD-WRT Wiki
(Difference between revisions)
Revision as of 17:48, 16 November 2017 (edit) Ian5142 (Talk | contribs) (→Build Notes) ← Previous diff |
Revision as of 18:06, 25 February 2018 (edit) (undo) Ian5142 (Talk | contribs) (Added link to Where do I download firmware.) Next diff → |
||
Line 54: | Line 54: | ||
= Build Notes = | = Build Notes = | ||
+ | |||
+ | See [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] for links. | ||
* '''''Beta builds for this router - NOT Recommended''''' | * '''''Beta builds for this router - NOT Recommended''''' |
Revision as of 18:06, 25 February 2018
Contents |
Important Notes
- Router is perfect for under 70 Mbps
- Users who use QoS or VPN recommended 35 Mbps or less is perfect, provided not a lot of QoS rules are added.
- Report bugs to the Forums http://www.dd-wrt.com/phpBB2/viewforum.php?f=50 & SVN http://svn.dd-wrt.com
Hardware Specs
CPU | Ralink/MediaTek RT3052F |
---|---|
CPU Speed | 384 MHz |
Flash ROM | 4 MB |
RAM | 32 MB |
WiFi Radio | 2.4 GHz Only |
WLAN Support | A/B/G/N 20MHz/40MHz |
WLAN Max Speed | 300Mbps N |
Antenna Location | 2z External Non-Removable |
Switch | 4x 100 LAN + 1x 100 WAN |
Hardware
You can tell which Rev of the hardware this router is from the box (it will say "H/W Ver: D2" for example on the bottom of the box, underneath the barcode). A similar sticker with the hardware version and firmware version is also stuck on the bottom of the router itself. This means it's quick and easy to check the hardware revision before buying or borrowing it.
The factory default IP for this router is 192.168.0.1, user is "admin", password is blank.
Pros of this hardware
- Fairly inexpensive, eBay less then £10
- Decent fast CPU clock speed @ 384MHz
- Easy to install DD-WRT on this hardware.
Cons of this hardware
- No USB port, so cannot be a NAS for a USB drive, nor can it be used for Printer Sharing of a USB printer.
- 70 Mbps over WAN (Usually Your Internet ISP) has problems reaching but anything below, Fine, This is due to CPU limits.
Build Notes
See Where do I download firmware? for links.
- Beta builds for this router - NOT Recommended