Brctl command

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 07:14, 13 February 2009 (edit)
Alvin (Talk | contribs)
m
← Previous diff
Revision as of 07:03, 5 June 2009 (edit) (undo)
Ausimus1 (Talk | contribs)
(Removing all content from page)
Next diff →
Line 1: Line 1:
-You are here: '''[[Main_Page|DD-WRT wiki mainpage]] / [[Index:Scripting|Scripting]] / [[Telnet/SSH_and_the_Command_Line|SSH/Telnet & The CLI]] / brctl ''' 
-BRCTL is used to create a bridge between two interfaces.  
- 
-== Bridges == 
-=== View === 
- 
-To view the current bridges, use the following command on a [[Telnet/SSH and the Command Line|SSH/Telnet terminal]]: 
- 
- brctl show 
- 
-The command will then output a bridge name (Often br0 or br1), bridge ID (Used to uniquely specify the bridge), and the current settings for STP (Spanning Tree Protocol). The output wil be formated similar to this: 
- 
- bridge name bridge id STP enabled 
- br0 8000.001217318d3e yes 
- 
-=== Add === 
- 
-A bridge can be added using the following command, with <name> being replaced with the name of the bridge being replaced. 
- 
- brctl addbr <name> 
- 
-=== Delete === 
- 
-Where name is the user specified name of the bridge. To delete a bridge, one would use 
- 
-brctl delbr <name> 
- 
-== Interfaces == 
- 
-Although the preceding commands simply create an instance of a bridge, in order to use them, one must add interfaces to a bridge. The bridge "br0" is standard bridge on DD-WRT.  
- 
-=== Show === 
- 
-In order to show the current interfaces that are members of a bridge, we use a command similar to the "show" command: 
- 
- brctl showbr br0 (for V23SP2: brctl showstp br0) 
- 
-This would generate output similar to the following: 
- 
- br0 
- bridge id 8000.001217318d3e 
- designated root 8000.001217318d3e 
- root port 0 path cost 0 
- max age 20.00 bridge max age 20.00 
- hello time 2.00 bridge hello time 2.00 
- forward delay 0.00 bridge forward delay 0.00 
- ageing time 42.30 gc interval 4.00 
- hello timer 1.28 tcn timer 0.00 
- topology change timer 0.00 gc timer 2.02 
- flags 
-  
- vlan0 (1) 
- port id 8001 state forwarding 
- designated root 8000.001217318d3e path cost 100 
- designated bridge 8000.001217318d3e message age timer 0.00 
- designated port 8001 forward delay timer 0.00 
- designated cost 0 hold timer 0.00 
- flags 
-  
- eth1 (2) 
- port id 8002 state forwarding 
- designated root 8000.001217318d3e path cost 100 
- designated bridge 8000.001217318d3e message age timer 0.00 
- designated port 8002 forward delay timer 0.00 
- designated cost 0 hold timer 0.00 
- flags 
- 
-Here we can see that the bridge contains two members, eth0 and vlan0. 
- 
-===Add=== 
- 
-To add a interface to a bridge, the command syntax is 
- 
- brctl addif <brname> <ifname> 
- 
-Where <brname> is the existing bridge name, and ifname is the interface you want to add. 
- 
-===Remove=== 
- 
-To remove a interface from a bridge, the syntax is very similar 
- 
-brctl delif <brname> <ifname> 
- 
-==Other Features== 
- 
-There are a few other features that brctl offers, but they are beyond the scope of this page. In order to get a better understanding of them, you should read the [http://linuxcommand.org/man_pages/brctl8.html brctl Manual Page]. 
- 
-'''One KEY thing to note is that the brctl commands slightly differ from the man page. Especially the "show" command. The documentation that i suggested recommends "brctl show <brname>" but in DD-WRT the proper syntax is "brctl showbr <brname>". If you have any doubts, simply type "brctl" and a list of available commands will be displayed.''' 
- 
-=External Links= 
-http://www.tinc-vpn.org/examples/bridging 
-<br> 
-http://linuxcommand.org/man_pages/brctl8.html 
- 
- 
-[[Category:English documentation]] 
-[[Category:commandline command reference]] 

Revision as of 07:03, 5 June 2009