Belkin Share Max N300 F7D7301 F7D3301

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 05:34, 3 September 2016 (edit)
Skygunner (Talk | contribs)
(New page: Initial flash and CFE recovery how to http://tsengf.blogspot.com/2012/05/dd-wrt-on-belkin-share-max-n300.html Note: This router has gigabit switch; DD-WRT Mini build doesn't have the driv...)
← Previous diff
Revision as of 21:06, 30 November 2017 (edit) (undo)
Ian5142 (Talk | contribs)

Next diff →
Line 1: Line 1:
-Initial flash and CFE recovery how to+{{Languages|Belkin Share Max N300 F7D7301 F7D3301}}
-http://tsengf.blogspot.com/2012/05/dd-wrt-on-belkin-share-max-n300.html+__TOC__
-Note:+=Introduction=
-This router has gigabit switch;+
-DD-WRT Mini build doesn't have the driver for gigabit switch;+
- +
-So if you do the initial flash using F7D7301-mini build or F7D3301-mini build, after flashing+
-you want have wired network to the router, you only have wireless access to the router. +
-You won't have ip assigned from the router if connected wired.+
-You can't ping the router even you assign a static IP address for the wired connection.+
-At this point, upgrade the mini build to some larger build like VPN or Mega build, then the wired switch will work as should.+
system type : Broadcom BCM4716 chip rev 1 system type : Broadcom BCM4716 chip rev 1
Line 24: Line 16:
shadow register sets : 1 shadow register sets : 1
-with DD-WRT K26+=Installation=
-Router Model+Initial flash and CFE recovery how to
-Belkin F7D3301 / F7D7301 v1+http://tsengf.blogspot.com/2012/05/dd-wrt-on-belkin-share-max-n300.html
-Firmware Version DD-WRT v3.0-r30534 mega (09/01/16)+ 
-Kernel VersionLinux 2.6.24.111 #30935 Thu Sep 1 08:44:53 CEST 2016 mips+Note:
-NVRAM 26 KB / 32 KB+This router has gigabit switch;
 +DD-WRT Mini build doesn't have the driver for gigabit switch;
 + 
 +So if you do the initial flash using F7D7301-mini build or F7D3301-mini build, after flashing
 +you want have wired network to the router, you only have wireless access to the router.
 +You won't have ip assigned from the router if connected wired.
 +You can't ping the router even you assign a static IP address for the wired connection.
 +At this point, upgrade the mini build to some larger build like VPN or Mega build, then the wired switch will work as should.
 + 
 +[[Category:Belkin guides]]

Revision as of 21:06, 30 November 2017

Contents


Introduction

system type  : Broadcom BCM4716 chip rev 1 processor  : 0 cpu model  : MIPS 74K V4.0 BogoMIPS  : 226.09 (Linksys_WRT1900AC_v2 3188.32, MTK7620A 385.02) wait instruction  : no microsecond timers  : yes tlb_entries  : 64 extra interrupt vector  : no hardware watchpoint  : yes ASEs implemented  : mips16 dsp shadow register sets  : 1

Installation

Initial flash and CFE recovery how to http://tsengf.blogspot.com/2012/05/dd-wrt-on-belkin-share-max-n300.html

Note: This router has gigabit switch; DD-WRT Mini build doesn't have the driver for gigabit switch;

So if you do the initial flash using F7D7301-mini build or F7D3301-mini build, after flashing you want have wired network to the router, you only have wireless access to the router. You won't have ip assigned from the router if connected wired. You can't ping the router even you assign a static IP address for the wired connection. At this point, upgrade the mini build to some larger build like VPN or Mega build, then the wired switch will work as should.