Asus RT-N16

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 02:06, 23 December 2009 (edit)
Ddggttff3 (Talk | contribs)

← Previous diff
Revision as of 02:07, 23 December 2009 (edit) (undo)
Ddggttff3 (Talk | contribs)
m
Next diff →
Line 6: Line 6:
LAN Ports = WAN x 1 RJ-45 for 10/100/1000 Base T, LAN x 4 RJ-45 for 10/100/1000 Base T LAN Ports = WAN x 1 RJ-45 for 10/100/1000 Base T, LAN x 4 RJ-45 for 10/100/1000 Base T
 +
Antennas = 3 x external antenna Antennas = 3 x external antenna
 +
USB ports = USB2.0 x 2 USB ports = USB2.0 x 2
 +
Operating Frequency = 2.4GHz ~ 2.5GHz Operating Frequency = 2.4GHz ~ 2.5GHz
 +
802.11n Draft = up to 300Mbps 802.11n Draft = up to 300Mbps
 +
802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps 802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps
 +
802.11b = 1, 2, 5.5, 11Mbps 802.11b = 1, 2, 5.5, 11Mbps
 +
Unit RAM = 128 MB Unit RAM = 128 MB
 +
Unit CPU = 533 MHz (Factory clocked to 480MHz) Unit CPU = 533 MHz (Factory clocked to 480MHz)
 +
== Installation: == == Installation: ==

Revision as of 02:07, 23 December 2009

Contents

ASUS RT-N16

Image:Rt_n16_209.jpg

Specs:

LAN Ports = WAN x 1 RJ-45 for 10/100/1000 Base T, LAN x 4 RJ-45 for 10/100/1000 Base T

Antennas = 3 x external antenna

USB ports = USB2.0 x 2

Operating Frequency = 2.4GHz ~ 2.5GHz

802.11n Draft = up to 300Mbps

802.11g = 6, 9, 12, 18, 24, 36, 48, 54Mbps

802.11b = 1, 2, 5.5, 11Mbps

Unit RAM = 128 MB

Unit CPU = 533 MHz (Factory clocked to 480MHz)


Installation:

1. Do a 30/30/30 on your device, to reset the NVRAM.

2. Download the firmware located here: http://www.dd-wrt.com/dd-wrtv2/downloads/others/eko/V24-K26/svn13491-snow/Asus/RT-N16/dd-wrt.v24-13491_NEWD-2_K2.6_mini_RT-N16.trx

4. Flash the downloaded firmware file through the router's GUI at http://192.168.1.1/

3. After flashed, wait for the device to show the password change screen for DD-WRT.

4. Do another 30/30/30.

5. Enjoy DD-WRT on the RT-N16!

6. Think about donating to DD-WRT.


Uninstallation: - If you ever choose to do so

1. Download the latest ASUS firmware from asus's site.

2. Rename the asus file from .trx to .bin

3. go into the DD-WRT firmware upgrade page, set it to reset defaults, and select the ASUS firmware you renamed.

4. After the flash finishes, and you see the ASUS GUI, do a 30/30/30

5. Try to enjoy ASUS's firmware, and keep missing DD-WRT. (you can just flash back to dd-wrt if you ever want)


Current Known Issues:

UPNP is currently not working for the RT-N16, so for now leave the feature disabled unless you want a full CPU Load. (as of 12/22/09)

Other:

This router does have a recovery mode if ever needed for flashing, and to access it, press the reset button, then plug in power, and tftp the firmware you want to flash. Dont forget to do a 30/30/30 before and after every flash to make sure you dont have any nvram problems or conflicts.

Special thanks to Eko for making this possible!

(edited by ddggttff3 on 12/22/09)