Asus RT-N15
From DD-WRT Wiki
Revision as of 15:03, 2 April 2018 (edit) Ian5142 (Talk | contribs) (Added link to Where do I download firmware.) ← Previous diff |
Current revision (15:21, 25 May 2018) (edit) (undo) Ian5142 (Talk | contribs) (Updated serial section based on info from the openWRT wiki toh.) |
||
(4 intermediate revisions not shown.) | |||
Line 4: | Line 4: | ||
==Specs== | ==Specs== | ||
- | + | See wikidevi page for full specs: https://wikidevi.com/wiki/ASUS_RT-N15 | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
==Threads of interest== | ==Threads of interest== | ||
Line 58: | Line 14: | ||
The device is stitched from windows Firmware update in an official insertion (the version of an insertion 1.0.0.7) | The device is stitched from windows Firmware update in an official insertion (the version of an insertion 1.0.0.7) | ||
- | Firmware files can be found here: [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] (asus-rt-n15 folder). | + | Firmware files can be found here: [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] (asus-rt-n15 folder). Use the factory-to-ddwrt.trx to flash from Factory firmware to dd-wrt. |
==Upgrading== | ==Upgrading== | ||
- | + | Firmware files can be found here: [[Index:FAQ#Where_do_I_download_firmware.3F|Where do I download firmware?]] (asus-rt-n15 folder). Use the asus-rt-n15-ddwrt-webflash.bin file to upgrade dd-wrt to a newer version. | |
==Reverting== | ==Reverting== | ||
- | + | To restore the device to factory firmware, you need to put it in Recovery Mode. | |
- | + | # Download the factory firmware | |
- | + | # In dd-wrt, reset to factory defaults, through the GUI or CLI. | |
- | + | # Disconnect everything from the router, except the power cord. | |
- | + | # Push and hold the Reset button with the router powered on. Without releasing the Reset button, unplug the router. | |
- | + | # Wait until the power light starts blinking, then release the Reset button. | |
- | + | # (Not tested, most likely access a webpage at 192.168.0.1 or 192.168.1.1) We launch program Restoration Firmware, we select a file with an insertion, we stitch. | |
- | + | # (Not tested) Browse to the factory firmware file. Click the Upload button. | |
+ | # (Not tested) Wait at least 5 minutes before touching the power cord. | ||
+ | # (Not tested) Do a factory reset once the router comes back up successfully. | ||
==JTAG/Serial Info== | ==JTAG/Serial Info== | ||
Line 83: | Line 41: | ||
=====Serial Pinouts===== | =====Serial Pinouts===== | ||
- | + | Serial console is available on J1, pinout is as follows : | |
- | + | RT2880 | |
- | | + | [x] GND |
- | + | [x] TX | |
- | + | [x] RX | |
- | + | [x] VCC | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | Serials console baudrate is a bit unusual : 57600,8n1. | |
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | + | ||
- | =====Serial Recovery===== | ||
- | + | =====Serial Recovery===== | |
+ | See [[Serial_Recovery|Serial Recovery]] | ||
==Notes== | ==Notes== | ||
[[Category:Asus guides]] | [[Category:Asus guides]] |
Current revision
Contents |
NOTE: This device is a WIP.
NOTE: Requires K2.6, Do not flash anything else.
NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.
[edit] Specs
See wikidevi page for full specs: https://wikidevi.com/wiki/ASUS_RT-N15
[edit] Threads of interest
[edit] Flashing
The device is stitched from windows Firmware update in an official insertion (the version of an insertion 1.0.0.7)
Firmware files can be found here: Where do I download firmware? (asus-rt-n15 folder). Use the factory-to-ddwrt.trx to flash from Factory firmware to dd-wrt.
[edit] Upgrading
Firmware files can be found here: Where do I download firmware? (asus-rt-n15 folder). Use the asus-rt-n15-ddwrt-webflash.bin file to upgrade dd-wrt to a newer version.
[edit] Reverting
To restore the device to factory firmware, you need to put it in Recovery Mode.
- Download the factory firmware
- In dd-wrt, reset to factory defaults, through the GUI or CLI.
- Disconnect everything from the router, except the power cord.
- Push and hold the Reset button with the router powered on. Without releasing the Reset button, unplug the router.
- Wait until the power light starts blinking, then release the Reset button.
- (Not tested, most likely access a webpage at 192.168.0.1 or 192.168.1.1) We launch program Restoration Firmware, we select a file with an insertion, we stitch.
- (Not tested) Browse to the factory firmware file. Click the Upload button.
- (Not tested) Wait at least 5 minutes before touching the power cord.
- (Not tested) Do a factory reset once the router comes back up successfully.
[edit] JTAG/Serial Info
[edit] JTAG
This router does not have JTAG.
[edit] Serial
[edit] Serial Pinouts
Serial console is available on J1, pinout is as follows :
RT2880 [x] GND [x] TX [x] RX [x] VCC
Serials console baudrate is a bit unusual : 57600,8n1.
[edit] Serial Recovery
See Serial Recovery