Alfa N5

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 13:42, 22 June 2014 (edit)
Sash (Talk | contribs)

← Previous diff
Revision as of 13:43, 22 June 2014 (edit) (undo)
Sash (Talk | contribs)

Next diff →
Line 2: Line 2:
'''= Planet WNAP-7320 = OTAi 724S''' '''= Planet WNAP-7320 = OTAi 724S'''
 +
 +This instruction is also valid for the '''Alfa N5c'''
=Hardware= =Hardware=
*CPU Atheros AR7240 *CPU Atheros AR7240
-*Flash 8MB S25FL032A http://www.spansion.com/Support/Datasheets/S25FL032A_00_C3_e.pdf+*Flash 8MB
-*RAM 32 MB M12L128168A http://www.esmt.com.tw/DB/manager/upload/M12L128168A.pdf+*RAM 32 MB
-*Ethernet RTL8201CP http://www.realtek.info/pdf/rtl8201cp.pdf+
==Serial Port== ==Serial Port==

Revision as of 13:43, 22 June 2014

Contents


= Planet WNAP-7320 = OTAi 724S

This instruction is also valid for the Alfa N5c

Hardware

  • CPU Atheros AR7240
  • Flash 8MB
  • RAM 32 MB

Serial Port

115000,1,n,8

1 PWR
2 TX
3 RX
4 GND


Flashing

Initial

For initial flashing you have to access the device via serial connection.

U-Boot

Since the default is set to boot from the fixed address 0x9f650000, an new bootloader must be flashed before you can boot DD-WRT. Process each line step by step from the uboot console:

tftpboot 0x80060000 uboot.bin
erase 9f000000 +$filesize
cp.b $fileaddr 0x9f000000 $filesize

The old verseion is and the new one will be U-Boot 1.1.4t

DD-WRT/Recovery

Afer the uboot is flashed go on installing DD-WRT from the cli:

tftp 0x80060000 firmware.bin
erase 9f050000 +$filesize
cp.b $fileaddr 0x9f050000 $filesize