ASUS RT-G32

From DD-WRT Wiki

Revision as of 08:49, 2 January 2012 by Johnklehm (Talk | contribs)
Jump to: navigation, search

Contents

Introduction

This is a step by step guide to flashing DD-WRT onto an ASUS RT-G32.

Hardware: ASUS RT-G32 (this is not the Rev B version!)

dd-wrt version: DD-WRT v24-sp2 (11/21/10) std (SVN revision 15778)

OS used to flash: Windows 7

Preparation

  • Download ASUS firmware. I used RT-G32_V3.0.2.1_RU09.bin
  • Download the ASUS Firmware Restoration tool. I used version 1.0.12.0
  • Network settings needed for ASUS flashing tool.
    • IP: 192.168.1.254
    • Subnet Mask: 255.255.255.0
    • Gateway 192.168.1.1
    • DNS can be left blank.
    • Set these in Control Panel -> Network Connections -> Local Area Connection -> Properties -> TCP/IP -> Properties on Windows XP.
  • Download asus-to-dd-wrt.bin, I used build 15778
  • You should be connected to the router with a network cable on port 4.

Uninstall old ddwrt firmware

If you already have stock ASUS firmware on your G32 skip this step!

You can move on to the next step if you already have stock asus firmware installed OR if you have installed ddwrt using this guide.

This uninstall section is only meant to help undo changes from the old flashing method that was used before Dec 13 2010. You ONLY have to do this step if you have a ddwrt install from before that date.