AP Repeater on DLINK Dir-300
From DD-WRT Wiki
Revision as of 00:05, 22 January 2010 (edit) Seminma1 (Talk | contribs) (New page: == How to configure DLINK DIR-300 as AP Repeater ==) ← Previous diff |
Revision as of 00:15, 22 January 2010 (edit) (undo) Seminma1 (Talk | contribs) (→How to configure DLINK DIR-300 as AP Repeater) Next diff → |
||
Line 1: | Line 1: | ||
- | |||
== How to configure DLINK DIR-300 as AP Repeater == | == How to configure DLINK DIR-300 as AP Repeater == | ||
+ | |||
+ | I Have been researching because I need to use my DLINK Dir-300 as a Repeater Bridge | ||
+ | This operation mode is easily to find in a broadcom based hardware such as linksys, etc, BUT you can not set "Repeater Bridge" Mode on a Dir-300 | ||
+ | |||
+ | So Here's how to make some seamesly functionality : | ||
+ | |||
+ | I Assume that you already have an AP working under your administration. | ||
+ | Lets say that this AP SSID is "AP1" With a LAN IP ADDRESS of 192.168.1.1 | ||
+ | |||
+ | Ok, starting with that you have to go to your DIR-300 Configuration Page, now go to the "Setup" tab, now on "Basic Settings" tab under "wireless | ||
+ | |||
+ | |||
+ | A) | ||
+ | He conseguido hacer funcionar el dir-300 en modo repetidor de otro router wifi. Lo he puesto en modo client bridge y he creado una interface virtual con otro ssid. El router principal tiene ip 192.168.1.1 y el repetidor (DD-Wrt) tiene 192.168.1.2, puerta de enlace y dns primaria la direccion del primero(192.168.1.1). El repetidor tiene la wan y el dhcp desabilitados. El caso es que internet funciona sorprendentemente bien, pero sin embargo no puedo acceder a las paginas de configuracion de ninguno de los dos routers (192.168.1.1 192.168.1.2). | ||
+ | |||
+ | puerta de enlace y dns (192.168.1.254) | ||
+ | |||
+ | WAN y DHCP deshabilitado, clave wep configurada (la misma que la del router) |
Revision as of 00:15, 22 January 2010
How to configure DLINK DIR-300 as AP Repeater
I Have been researching because I need to use my DLINK Dir-300 as a Repeater Bridge This operation mode is easily to find in a broadcom based hardware such as linksys, etc, BUT you can not set "Repeater Bridge" Mode on a Dir-300
So Here's how to make some seamesly functionality :
I Assume that you already have an AP working under your administration. Lets say that this AP SSID is "AP1" With a LAN IP ADDRESS of 192.168.1.1
Ok, starting with that you have to go to your DIR-300 Configuration Page, now go to the "Setup" tab, now on "Basic Settings" tab under "wireless
A)
He conseguido hacer funcionar el dir-300 en modo repetidor de otro router wifi. Lo he puesto en modo client bridge y he creado una interface virtual con otro ssid. El router principal tiene ip 192.168.1.1 y el repetidor (DD-Wrt) tiene 192.168.1.2, puerta de enlace y dns primaria la direccion del primero(192.168.1.1). El repetidor tiene la wan y el dhcp desabilitados. El caso es que internet funciona sorprendentemente bien, pero sin embargo no puedo acceder a las paginas de configuracion de ninguno de los dos routers (192.168.1.1 192.168.1.2).
puerta de enlace y dns (192.168.1.254)
WAN y DHCP deshabilitado, clave wep configurada (la misma que la del router)