AP Repeater on DLINK Dir-300

From DD-WRT Wiki

(Difference between revisions)
Jump to: navigation, search
Revision as of 00:05, 22 January 2010 (edit)
Seminma1 (Talk | contribs)
(New page: == How to configure DLINK DIR-300 as AP Repeater ==)
← Previous diff
Revision as of 00:15, 22 January 2010 (edit) (undo)
Seminma1 (Talk | contribs)
(How to configure DLINK DIR-300 as AP Repeater)
Next diff →
Line 1: Line 1:
- 
== How to configure DLINK DIR-300 as AP Repeater == == How to configure DLINK DIR-300 as AP Repeater ==
 +
 +I Have been researching because I need to use my DLINK Dir-300 as a Repeater Bridge
 +This operation mode is easily to find in a broadcom based hardware such as linksys, etc, BUT you can not set "Repeater Bridge" Mode on a Dir-300
 +
 +So Here's how to make some seamesly functionality :
 +
 +I Assume that you already have an AP working under your administration.
 +Lets say that this AP SSID is "AP1" With a LAN IP ADDRESS of 192.168.1.1
 +
 +Ok, starting with that you have to go to your DIR-300 Configuration Page, now go to the "Setup" tab, now on "Basic Settings" tab under "wireless
 +
 +
 +A)
 +He conseguido hacer funcionar el dir-300 en modo repetidor de otro router wifi. Lo he puesto en modo client bridge y he creado una interface virtual con otro ssid. El router principal tiene ip 192.168.1.1 y el repetidor (DD-Wrt) tiene 192.168.1.2, puerta de enlace y dns primaria la direccion del primero(192.168.1.1). El repetidor tiene la wan y el dhcp desabilitados. El caso es que internet funciona sorprendentemente bien, pero sin embargo no puedo acceder a las paginas de configuracion de ninguno de los dos routers (192.168.1.1 192.168.1.2).
 +
 +puerta de enlace y dns (192.168.1.254)
 +
 +WAN y DHCP deshabilitado, clave wep configurada (la misma que la del router)

Revision as of 00:15, 22 January 2010

How to configure DLINK DIR-300 as AP Repeater

I Have been researching because I need to use my DLINK Dir-300 as a Repeater Bridge This operation mode is easily to find in a broadcom based hardware such as linksys, etc, BUT you can not set "Repeater Bridge" Mode on a Dir-300

So Here's how to make some seamesly functionality :

I Assume that you already have an AP working under your administration. Lets say that this AP SSID is "AP1" With a LAN IP ADDRESS of 192.168.1.1

Ok, starting with that you have to go to your DIR-300 Configuration Page, now go to the "Setup" tab, now on "Basic Settings" tab under "wireless


A) He conseguido hacer funcionar el dir-300 en modo repetidor de otro router wifi. Lo he puesto en modo client bridge y he creado una interface virtual con otro ssid. El router principal tiene ip 192.168.1.1 y el repetidor (DD-Wrt) tiene 192.168.1.2, puerta de enlace y dns primaria la direccion del primero(192.168.1.1). El repetidor tiene la wan y el dhcp desabilitados. El caso es que internet funciona sorprendentemente bien, pero sin embargo no puedo acceder a las paginas de configuracion de ninguno de los dos routers (192.168.1.1 192.168.1.2).

puerta de enlace y dns (192.168.1.254)

WAN y DHCP deshabilitado, clave wep configurada (la misma que la del router)