访问限制

From DD-WRT Wiki

Revision as of 23:25, 5 August 2009 by Nortic (Talk | contribs)
Jump to: navigation, search

访问限制 允许用户按组创建规则,管理外网访问内网上的机器。规则可以按:个人 IP、MAC 物理地址、IP范围、 时间日期、流量类型、URL 或关键字 等创建,管理访问权限。

用户能创建多达10组规则,每组规则归类为一个策略一个策略能包含对个独立的规则,例如过滤个别机器访问特定网站,或者过滤一个确切的不想要的P2P协议。

Remember that all policies will be used (this is different than in factory Linksys firmware where only the first matched is used)! For example, if policy #1 is a Deny policy that restricts all internet access to a machine on your LAN, that machine will no longer be able to access the Internet, regardless of any Filter policies you might have. Note: The term "Filter" is erroneously labeled as "Allow" in earlier versions of DD-WRT firmware. This is the main source of confusion when dealing with access restrictions in DD-WRT. See Eko's forum post for more information.

The Filter option is used to block access to web sites, services, or keywords. However, it does not block internet altogether like the "Deny" option does. Nor does it allow internet access during times that a Deny policy denies it.

If you will notice, when you click the "Deny" button (instead of the Filter button), those extra options at the bottom of the page get greyed out (at least in newer dd-wrt versions). This is because filtering a web site, service, etc. in a Deny policy is pointless since the machines in the policy would be denied internet access anyway!

Contents

拒绝互联网访问

  1. 从下拉菜单的1-10之间选择一个还没有被使用的策略号;
  2. 通过将Status设置为Enable来使能你的策略;
  3. Policy Name栏内给你测策略输入一个名字,例如: Deny Internet (限制因特网访问)
  4. 点击Edit List of clients 按钮
  5. List of clients界面内, 指定客户端的IP地址或MAC 地址,在IP栏内输入相应的IP地址,如果你希望指定一个IP地址的范围给过滤器, 可以通过在IP Range栏填入相应内容来完成。你也可以在MAC栏输入相应的MAC地址来达到同样的目的;
  6. 通过分别点击SaveApply按钮来保存与应用你的设置。点击Close按钮来回到Access Restrictions界面;
  7. 点击Deny Internet access for listed clients during selected days and hours 旁边的单选按钮;
  8. 通过选择Everyday或一周内的哪几天来设置这些天因特网的访问将被限制;
  9. 通过选择24 Hours或选择From指定时间段来指定限制因特网访问的时间段;
  10. 分别点击SaveApply来保存和应用设置;
  11. 重复上面的步骤来建立或修改其他的策略;

过滤服务/URLs/关键词

For more advanced content filtering try OpenDNS

  1. Select an unused policy number (1-10) in the drop-down menu.
  2. Enable your policy by setting Status to Enable.
  3. Enter a name for your policy in the Policy Name field. Ex. "Filter Bittorrent"
  4. Click the Edit List of clients button.
  5. On the List of clients screen, specify clients by IP address or MAC address. Enter the appropriate IP addresses into the IP fields. If you have a range of IP addresses to filter, complete the appropriate IP Range fields. Enter the appropriate MAC addresses into the MAC fields.
  6. Click the Save and Apply buttons to save your changes. Click the Close button to return to the Access Restrictions screen.
  7. Click the radio button next to Filter Internet access for listed clients during selected days and hours. (Remember, many DD-WRT versions will have an "Allow" option, but it really means "Filter")
  8. Set the days when access will be filtered. Select Everyday or the appropriate days of the week.
  9. Set the time when access will be filtered. Select 24 Hours, or check the box next to From and use the drop-down boxes to designate a specific time period.
  10. Under Blocked Services, enter the services you wish to block (if any).
  11. Under Website Blocking by URL Address, enter in the domain name(s) you wish to block (if any).
  12. Under Website Blocking by Keyword, enter the keywords you wish to block (if any).
  13. Click Save and Apply.
  14. To create or edit additional policies, repeat the necessary steps above.

Note: Filtering does not work if you don't enter a list of clients for that policy.

删除

删除互联网访问策略,只要选择对应的策略号,然后点击“删除”即可。

摘要

To see a summary of all the policies, click the Summary button. The Internet Policy Summary screen will show each policy's number, Policy Name, Days, and Time of Day. To delete a policy, click its box, and then click the Delete button. Click the Close button to return to the Filters screen.

过滤互联网端口范围

To filter PCs by network port number, select Both, TCP, or UDP, depending on which protocols you want to filter. Then enter the port numbers you want to filter into the port number fields. PCs connected to the Router will no longer be able to access any port number listed here. To disable a filter, select Disable.

Filtering Inbound Traffic

See Iptables.


Problems/Issues?

Still having problems with Access Restrictions? You may be using an older and no longer maintained version of DD-WRT firmware. In that case, it may help to review the steps in an older revision of this article, before it was modified for use with DD-WRT v24+