Search results
From DD-WRT Wiki
You searched for Serial_port_pinouts/fr
There is no page titled "Serial_port_pinouts/fr". You can create this page.
For more information about searching DD-WRT Wiki, see Help.
Showing below 3 results starting with #1.
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).
No page title matches
Page text matches
- Serial port pinouts (6,672 bytes)
1: {{Languages|Serial_port_pinouts}}
105: ... holes above the 2x6 JTAG port. Again, '''looking from the back of the router: Vcc - Rx - Tx - ? - Gnd...
153: *v2 (Broadcom BCM4716) pads from top to bottom, Ethernet ports above: '''[Vcc] [...
156: *v3 (Atheros AR7240) pads from left to right, Ethernet ports on right: '''[Vcc... - Linksys E1000 (4,980 bytes)
18: ...nload a trailed mini build (''mini_e1000v1.bin'') from the ''broadcom_K26'' folder.
22: # Connect an Ethernet cable from your computer to a router LAN port and disable ...
34: ...rst, then do a hard power cycle (unplug the power from the router--do not do a 30/30/30 reset). Wait a...
48: First see [[Serial Recovery]] and reference the [[Serial_port_pinouts#Linksys_E1000v2_E2000|serial pinout (E1000v2)]].
55: Now you can flash using a TFTP client from a computer, plugged in to port 1 on the router ... - Netgear WNR2000V2 (7,719 bytes)
36: From a `dmesg` output:
73: #*All trailed builds tested from 21061 and newer fail initial flash.
82: ...o have finished. You can watch the lights on the front if you need something to do. As long as they a...
93: *Build 42602 flashed from GUI, but required a power off and on
99: The BCM4716 uses the pll20mhz_table from [http://svn.dd-wrt.com/browser/src/linux/brcm/l...
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).