Search results
From DD-WRT Wiki
You searched for Reset_And_Reboot/fr
There is no page titled "Reset_And_Reboot/fr". You can create this page.
For more information about searching DD-WRT Wiki, see Help.
Showing below 7 results starting with #1.
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).
No page title matches
Page text matches
- Station Mode (5,583 bytes)
18: #Connect a cable from your computer to the LAN port on your router.
21: ...d password - if not asked for this, do a proper [[Reset_And_Reboot|reset]]!
26: ...ss can be found on the "Site Survey" page, linked from the ''Wireless'' tab in ''Status''
29: ...eded, change ''Connection Type'' to ''Static IP'' from "Automatic Configuration - DHCP"
32: ... the Local IP Address '''to a different subnet''' from the primary host router (e.g. 192.168.2.1) - Firmware FAQ (40,468 bytes)
73: ...'the factory-to-ddwrt file is to flash the router from OEM''' to DD-WRT. '''The webflash file is to up...
80: ...l mirror repository: http://ddwrt-kong.clonevince.fr/ '''(repository removed)'''
91: ... to find the gateway address (e.g. 192.168.x.1). From a command line, run ''ipconfig'' in Windows, or...
109: ..._reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]]. Reset your router to [[Factor...
117: ...ricked. See [[Recover_from_a_Bad_Flash|Recovering from a bad flash]]. - 安装 (16,952 bytes)
13: ...ents referenced above to find out why). The user-friendly dd-wrt download page [[http://www.dd-wrt.co...
23: ** Use the ''_mini'' version when upgrading from '''original Linksys firmware'''. You need the '...
44: ...接网络。我们建议您将本页及[[Recover from a Bad Flash|从失败的刷新恢复]]、[[Firm...
94: ... 首先在将要安装 dd-wrt 的设备上执行[[Reset_And_Reboot/zh_cn|硬复位]]。
103: # 最后,再执行一次[[Reset_And_Reboot/zh_cn|硬复位]]。 - Часто задаваемые вопросы (69,439 bytes)
47: ...позиторий: http://ddwrt-kong.clonevince.fr/
104: ...я этого. См. [[Сброс 30/30/30]] и [[Reset_And_Reboot|Reset And Reboot]]. Сначала сбросьт...
112: ...ию. См. [[Recover_from_a_Bad_Flash|Recovering from a bad flash]].
116: ...ошивки. См. [[Сброс 30/30/30]] и [[Reset_And_Reboot|Reset And Reboot]].
143: ...становки]], [[Сброс 30/30/30]] и [[Reset_And_Reboot|Reset And Reboot]]. - WHR-G300N V2 (8,426 bytes)
3: ==Flashing from Buffalo Firmware==
15: ...ard_reset_or_30/30/30|Hard reset or 30/30/30]], [[Reset_And_Reboot|Reset And Reboot]] and [[Factory_Defaults|Factory...
19: Get the files from the link provided just above. For upgrades in t...
40: # Get the Buffalo firmware from their site. You may need to choose the right re...
65: ...he sense that your computer requires any feedback from the router. tftp is basically just prepped to s... - 刷机 (18,418 bytes)
32: ** Use the ''_mini'' version when upgrading from '''original Linksys firmware'''. You need the '...
51: ...接网络。我们建议您将本页及[[Recover from a Bad Flash|从失败的刷新恢复]]、[[Firm...
101: ... 首先在将要安装 dd-wrt 的设备上执行[[Reset_And_Reboot/zh_cn|硬复位]]。
110: # 最后,再执行一次[[Reset_And_Reboot/zh_cn|硬复位]]。
124: ...试重设密码。查看 [[Index:FAQ#I_upgraded_from_early_SP2_to_a_recent_version._Why_does_my_logi... - Firmware FAQ/ja (38,399 bytes)
43: ...official repository: http://ddwrt-kong.clonevince.fr/
61: ...'the factory-to-ddwrt file is to flash the router from OEM''' to DD-WRT. '''The webflash file is to up...
96: ..._reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]]. Reset your router to [[Factor...
104: ...ているかを確認しましょう。[[Recover_from_a_Bad_Flash|フラッシュ作業失敗から...
108: ..._reset_or_30/30/30|Hard reset or 30/30/30]] や [[Reset_And_Reboot|Reset And Reboot]]を見てください。
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).