Search results

From DD-WRT Wiki

You searched for Repeater/pt

Jump to: navigation, search

There is no page titled "Repeater/pt". You can create this page.

For more information about searching DD-WRT Wiki, see Help.

Showing below up to 20 results starting with #1.


View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).

Article title matches

  1. AP Repeater on DLINK Dir-300 (35 bytes)
  2. Universal Wireless Repeater (9,297 bytes)
    1: ...s]] / [[Linking Routers]] / '''Universal Wireless Repeater'''
    6: ...s point, independent of the SSID and type of encryption used.
    8: ...ATE instructions for creating a special UNIVERSAL repeater as explained below, not for linking the routers y...
    10: ...instructions for creating a '''Universal Wireless Repeater''' appliance: a device that you can place anywhe...
    12: ... space, which is different from address space the repeater connects to.
  3. LaFonera Software Universal-Repeater (25,850 bytes)
    2: ...ory:LaFonera_Software_(en)|Software]] / Universal-Repeater'''
    6: ...ge for the original fonera-firmware. With the script "ponte2" universal repeating should be possible.'...
    12: '''To install the script you just run these commands:'''
    26: ...lRepeating will be created. You can start the script with the command: "sh universalRepeating"
    28: ... it here, to apply more functionality to this script.
  4. Wlan Repeater (9,054 bytes)
    1: {{Languages|Repeater}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater'''
    13: ... required to be made to your host-router / AP except that you usually must use WPA2-AES ONLY for dd-wr...
    14: ...ther unique subnet in your network. If you need a repeater-type solution in the same subnet you are in the w...
    21: ...epare and verify the DD-WRT to be configured as a repeater
  5. Repeater Bridge (21,999 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...Main]] / [[Tutorials]] / [[Linking Routers]] / '''Repeater Bridge'''
    9: ==Difference between Client Bridge and Repeater Bridge==
    13: ... need to bridge wired clients; the extra wireless repeater capability comes along for free; however, you are...
    15: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
  6. Repeater Bridge/fr (12,531 bytes)
    1: {{Languages|Repeater Bridge}}
    4: ...OUVEAU : depuis la V24, le routeur secondaire accepte des connexions à fil ET sans fil.
    8: ...réseau créé autour du routeur secondaire n'accepte que des clients connectés par câble. Depuis la...
    11: [[Image:Repeater_Bridge.jpg|thumbnail|Reference Image]]
    23: ...igurer le routeur sous DD-WRT en Répéteur pont (Repeater Bridge).
  7. LaFonera Software Wireless-Repeater (2,067 bytes)
    2: ...ware_(en)|Software]] / LaFonera_Software_Wireless-Repeater'''
    9: This is a "Repeater Mode"
    25: Router Name : Whatever you want..i used Repeater
    32: ...HCP Type= DHCP Server (I will assign ip also to laptop connected wireless or wired to fonera)
    41: ...for client bridge and a virtual interface for accept also WIFI users in fonera)
  8. Repeater Bridge/ru (1,365 bytes)
    1: {{Languages|Repeater Bridge}}
  9. Repeater Bridge/pt (1,306 bytes)
    1: {{Languages|Repeater Bridge}}
    2: ...ainpage]] / [[Linking_Routers|Linking Routers]] / Repeater Bridge'''
    13: [[Category:Wlan/pt]]
    14: [[Category:Switch/pt]]
  10. WDS REPEATER on QCA (97 bytes)

Page text matches

  1. DD-WRT Doku (DE) (83,042 bytes)
    31: ...ksys.de Linksys]. Es sind auch einige versteckte Optionen freigeschaltet. Desweiteren kommen noch eini...
    213: *PPTP-VPN-Server
    217: *Startup-, Firewall-, und Shutdown-Skripte
    218: *WDS-Repeater-Modus
    261: ...ient, SNMP, IPv6, MMC/SD Card Support, SSH, PPTP/PPTP Client, UPnP, HTTPS Support für Web Management,...
  2. Tutorials (9,700 bytes)
    44: * [[Linking Routers]] - WDS, Repeaters, OLSR, etc.
    67: * [[Repeater Bridge]]
    74: * [[Startup Scripts]]
    118: * [[Iptables command|Iptables command]]
    125: ...Tunneling and VPN Category] - including OpenVPN, PPTP
  3. Client Mode (5,465 bytes)
    7: ...i-radio routers. It is not seen as a WAP, nor accepts wireless connections by other client devices.
    11: ...p DD-WRT as a [[Client Bridged|Client Bridge]], [[Repeater Bridge]] or use [[WDS_Linked_router_network|WDS]]...
    27: ...ecific one (i.e. the primary router, instead of a repeater), enable MAC Filtering on the Wireless Tab, and a...
    29: #''(Optional)'' If available, in ''Wireless'' tab (or und...
    37: #''(Optional)'' Set your gateway to the IP address of you...
  4. Glossary (58,851 bytes)
    16: - (paraphrased and exerpted from the Internet Engineering Task Force's RFC ...
    28: ...nels in 2.4 GHz frequency band of 802.11b, but adopted the OFDM model of 802.11a so it also supports t...
    49: ...e mode used when configuring a router to act as a repeater.
    76: === Captive Portal ===
    78: A captive portal is a wireless access point which only p...
  5. Wireless Bridge (43,131 bytes)
    6: ... on how to set up a client bridge. It is being kept as there might be info that some find useful, but...
    40: '''Important:''' If you want to use WPA encryption on your client bridge, make sure your key is n...
    87: ... AP,Client,adhoc,repeater,repeater bridge. I used Repeater Bridge and had sucess following the rest of these...
    104: ***IP address: 192.168.1.49 [your compter IP]
    137: My Primary Router has 128bit WEP Encryption enabled. It does NOT have Wireless MAC Address...
  6. WAN Port (752 bytes)
    3: When the WRT is used as an Access Point (AP) or repeater (WDS), the WAN port can easily be configured as a...
    10: # Down the Basic Setup page, the option WAN Port appears. Check the box 'Assign WAN Po...
  7. DD-WRT Docu (IT) (14,289 bytes)
    21: *Server PPTP VPN
    25: *Script di Startup, Firewall e Shutdown
    26: *Modalità WDS Repeater
    51: *Stato dei client wireless e WDS con uptime e utilizzazione processore
    140: ...ne ufficiale. È inoltre possibile utilizzare script di shell in modalità [[Telnet/SSH and the Comman...
  8. DD-WRT Manual (SE) (30,300 bytes)
    70: *'''QoS, Bandbreddsfördelning''' (Optimera för Spel och tjänster / Nätmask / MAC / E...
    72: *PPTP VPN Server & Klient
    79: ...tatus på trådlösa klienter och WDS med systemupptid och processorbelastning
    83: *Uppstart, Brandvägg, och avstängningsskript
    93: *WDS Repeater Mode
  9. Useful Scripts (53,564 bytes)
    1: ...ge]] / [[Index:Scripting|Scripting]] / Useful Scripts
    3: Certain scripts can enhance the function of your router with DD-...
    5: ...o load scripts onto the router, see [[Startup Scripts]].
    24: ...[[Optware]], the files are ld-opt.so.conf and ld-opt.so.cache
    35: Afterward put the line below inside a startup script
  10. Client Bridged (5,400 bytes)
    9: ...ion problems. See [[Linking Routers]] for a description of each of the modes.
    16: ...clients, all of which will be bridged through the Repeater Bridge device.
    29: # The wireless network mode, channel, and encryption match the primary router settings.
    52: ... it works without encryption, check that the encryption passphrase and types match.
  11. What is DD-WRT? (53,196 bytes)
    319: ...ign="left" | [[Glossary#PPTP VPN Server & Client|PPTP VPN Server & Client]]
    427: ...w Status of Wireless Clients and WDS with System Uptime/Processor Utilization
    475: ...an.de/index.php?title=Startup_Scripts startup script])
    607: | align="left" | [[Glossary#Repeater|WDS Repeater Mode]]
    708: ...EFORE and AFTER flashing from OEM firmware '''EXCEPT for ARM devices'''. It is also recommended for f...
  12. 什么是 "DD-WRT"? (53,158 bytes)
    305: ...ign="left" | [[Glossary#PPTP VPN Server & Client|PPTP VPN Server & Client]]
    413: ...w Status of Wireless Clients and WDS with System Uptime/Processor Utilization
    461: ...an.de/index.php?title=Startup_Scripts startup script])
    593: | align="left" | [[Glossary#Repeater|WDS Repeater Mode]]
    1230: ...ient |PPTP Client]]/[[PPTP_Server_Configuration |PPTP Server]]
  13. Bridging (2,653 bytes)
    23: ...your wireless LAN, this is probably your '''best option.''' An example of this is hooking up one or tw...
    32: =Repeater Bridge=
    33: ...either your main router or your secondary router (repeater bridge).
    35: ...e of your radio bandwidth will be consumed by the repeater function.
    40: ...des not discussed here are '''AP, Adhoc''' and''' Repeater'''. Although these modes employ the router's radi...
  14. Universal Wireless Repeater (9,297 bytes)
    1: ...s]] / [[Linking Routers]] / '''Universal Wireless Repeater'''
    6: ...s point, independent of the SSID and type of encryption used.
    8: ...ATE instructions for creating a special UNIVERSAL repeater as explained below, not for linking the routers y...
    10: ...instructions for creating a '''Universal Wireless Repeater''' appliance: a device that you can place anywhe...
    12: ... space, which is different from address space the repeater connects to.
  15. Firmware FAQ (38,077 bytes)
    64: ...uild''' (with the model in the file name), '''except for special cases''' like nv60k versus nv64k diff...
    79: You can also attempt to [[Obtaining_Router_IP|obtain your router IP]]....
    99: ...ess. If you do not know the address, you can attempt to [[Obtaining_Router_IP|obtain the router IP]]. ...
    141: Now you ''may'' have an option to click the DHCP Release button and then turn...
    176: ...`iptables -L`, `iptables -t nat -L`, & the /tmp/.ipt file).
  16. AutoAP (11,423 bytes)
    2: ...net in a mobile or portable environment. The script paremeters are highly configurable, including abi...
    4: ...d use this script on your router while in [[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]], o...
    10: ... setup [[UWR | Repeater Mode]], [[Client_Mode_Wireless | Client Mode]] or...
    17: ... seconds tries to download stand-alone AutoAP script. Once downloaded, AutoAP starts.
    26: ...o the router and perform a "ps" to verify the script is running.
  17. LaFonera Info Hardware-Specifications (3,830 bytes)
    16: * Power Consumption: 4 Watt
    60: * Siemens Gigaset Wlan repeater 108
  18. LaFonera (en) (6,312 bytes)
    40: ...Fonera release (20080408). Stable. I'm having an uptime of 59 days right now.
    88: ... [[LaFonera_Software_Universal-Repeater|Universal Repeater mode]]
    96: .../browser/src/router?order=date&desc=1 Short description of changes made on the source of DD-WRT]
    102: # set up cifs or samba to store captures packets with aircrack and to install ipkgs to...
    106: ...cript/tutorial so people can still use FON_AP as option?
  19. Routeurs en mode réseau WDS (6,113 bytes)
    6: * 3Com OfficeConnect,3CRWE454G72, en mode Repeater
    17: ...hack SWA-103 (Waveline Micro AccessPoint) en mode Repeater
    24: * Netgear WG602 v3 en mode Repeater
    26: * Siemens Gigaset Repeater
    50: ...vaut mieux travailler sur un réseau radio non crypté. '''Wireless -> Wireless Security -> Security M...
  20. LaFonera Hardware Power-over-Ethernet (3,201 bytes)
    25: ...ied running two units in series, off 12V, with no PT's, but the power drain cycles when under load and...
    27: ...ridge. Or both can run as bridges. Ideal low-cost repeater solution.
    29: == Build an POE adapter ==
    31: ...tp://www.yokoy.de/sonstiges/bauanleitungen/poe-adapter20050207.pdf

View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).



Search in namespaces:

List redirects
Search for