Search results
From DD-WRT Wiki
You searched for Hard_reset_or_30/30/30/ja
There is no page titled "Hard_reset_or_30/30/30/ja". You can create this page.
For more information about searching DD-WRT Wiki, see Help.
Showing below up to 20 results starting with #1.
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).
No page title matches
Page text matches
- Linksys EA6500 V1 (23,843 bytes)
17: ...om/betas/2017/08-03-2017-r33006/linksys-ea6500/ r33006]'''</font><br><sup>''--[[User:EA6500v1|EA6500v1...
50: | 450 Mbps + 1300 Mbps (1750 Mbps)
110: ...]] (the infamous [[Hard_reset_or_30/30/30 | 30-30-30]]). Doing so can erase the CFE (bootloader) and b...
154: SHA-256: E2A95AA4133C5B5F28D92FE0543CB5486301BCD83A23BF354A74E3B7FCD5162C
180: ...F74E346549805A3AD13943FB3C15B0F3931A992EB9B60CE6543085AD21552 - Linksys WRT610N (11,615 bytes)
2: ... Linksys device (replaced by the [[Linksys E3000|E3000]]) with the following features:
5: * v1 300 MHz ([http://www.broadcom.com/products/Wireless-...
57: #[[Hard_reset_or_30/30/30|Hard reset]]
62: #[[Hard_reset_or_30/30/30|Hard reset]] again
109: ...ce is enabled, which have been experienced from r13064 to r14929 so far. When wl1 is enabled and WPA i... - Asus WL-500g Deluxe (2,713 bytes)
10: #Do a proper [[Hard_reset_or_30/30/30|hard reset]]. '''Do not confuse the red 'EZ Setu...
11: #Do a second 30-30-30 reset, but do not power cycle it at the end. Thi... - Netgear WNR3500L (4,176 bytes)
25: *Perform a [[Hard_reset_or_30/30/30|hard reset]] on the router.
39: ...loads/betas/2020/05-05-2020-r43055/broadcom_K3X/ 43055])<br> - Installation (20,950 bytes)
91: ...arkred>WARNING: some devices should not use 30/30/30, including all ARM devices.</font>
92: ...the reset button until the lights flash (or up to 30 sec). Be careful when using this method! Research...
94: ##Javascript is required for the Web interface. Try a ...
95: ...]]. If still having issues, [[Hard_reset_or_30/30/30#Erasing_NVRAM|erase the nvram]].
156: ...2018 (35770 and later). See [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]] for details. - Linksys WRT54G v2.2 (1,689 bytes)
12: #Do a [[Hard_reset_or_30/30/30|hard reset]] on the router - Firmware FAQ (39,448 bytes)
59: ...t, and k3.10+ supports SFE accelerated NAT since 33006
103: ... See [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]]. Rese...
115: ... See [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]].
133: ...s]], [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]].
147: ...s]], [[Hard_reset_or_30/30/30|Hard reset or 30/30/30]] and [[Reset_And_Reboot|Reset And Reboot]]. - Reset And Reboot (4,732 bytes)
5: === Hard Reset ("30 reset")===
11: ...while the router is on, and keep holding it about 30 seconds. On different models you may see rapid fl...
15: === Hard Reset ("30/30/30 reset")===
19: [[Hard_reset_or_30/30/30|How to do a "30/30/30 reset"]]
21: ...d keep holding the reset button for an additional 30 seconds. This will wipe the nvram out. Keep in mi... - Linksys WRT54GS v5.0 & 5.1 & 6.0 (3,659 bytes)
19: ...Do a [[Hard_reset_or_30/30/30|hard reset]] (30/30/30) - Installation/ja (27,080 bytes)
18: ...スの一覧については、'''[[Firmware FAQ/ja#.E3.81.A9.E3.81.AE.E3.83.AB.E3.83.BC.E3.82.BF.E3....
54: ...nd basic techniques such as [[Hard_reset_or_30/30/30]] and Tftp [http://www.dd-wrt.com/wiki/index.php/...
58: #Do not try to skimp on the [[Hard_reset_or_30/30/30]] reset before or after each change to your route...
95: ## '''Use [[Hard reset or 30/30/30]].'''
97: ...30/30]]; this appears to be referring to a simple 30-second reset - [[User:Clock|clock]]). Be careful... - Linksys WRT54G2 v1.0 (18,520 bytes)
81: ...stalling Eko's 13000 NEWD Micro Plus w/ SSH (Sept 30, 2009). [See [[Linksys_WRT54G2_v1.0#Micro_builds...
102: ...the rest of these steps, do a HARD RESET or 30/30/30!
128: A- Power off (unplug) the router and wait for 30 seconds. Make sure to hold the tip of a pointy ob...
155: 64 bytes from 192.168.1.1: icmp_seq=3092 ttl=100 time=1.074 ms
156: 64 bytes from 192.168.1.1: icmp_seq=3093 ttl=100 time=0.717 ms - 安装 (16,952 bytes)
52: ...[[Factory Defaults|出厂默认设置(含30/30/30硬复位大法)]]===
53: .......最好按以下介绍实施硬复位或 30/30/30 复位)
65: # 按住路由器后部的复位按钮30秒
68: ...复位)'''【即插电30秒 断电30秒 再插电30秒】
70: ...位按钮30秒,保持按住的状态拔掉电源30秒,然后同样保持按住的状态重新插... - Installation/fr (33,890 bytes)
52: ...ialisation matérielle ou réinitialisation 30/30/30]] et tftp [http://www.dd-wrt.com/wiki/index.php/T...
56: ...ialisation matérielle ou réinitialisation 30/30/30]] avant ou après chacune des modifications appo...
100: ...ialisation matérielle ou réinitialisation 30/30/30]]'''.
102: ...30/30/30]]; mais à une simple réinitialisation 30 secondes - [[User:Clock|clock]]). Soyez très pr...
111: ... utiliser l'interface Web, il vous faudra valider Javascript et désactiver toutes les restrictions de... - Linksys E1550 (3,454 bytes)
12: | 300 MHz
27: | 300 mbps
48: # Do a [[Hard_reset_or_30/30/30|reset]]
55: # Do a [[Hard_reset_or_30/30/30|reset]]. Another power cycle after the reset migh...
75: ...ld finish, you will then need to do another 30-30-30 reset and then access the stock webgui @ 192.168.... - Netgear R6400v1 (2,598 bytes)
6: The hardware is almost identical to a Netgear R6300v2, but has external antennas and different FCC a...
27: | 450 Mb/s (2.4Ghz), 1300 Mb/s (5Ghz)
49: '''<font color=red>DO NOT "30-30-30" Reset ARM Devices!</font>'''
61: ...bled) to the device and see [[Hard_reset_or_30/30/30#Erasing_NVRAM|Erasing NVRAM]], as this is build-d... - Hard reset or 30/30/30 (5,274 bytes)
1: {{Languages|Hard_reset_or_30/30/30}}
19: ...r=maroon>'''DO NOT''' attempt to hard reset/30-30-30 or erase the nvram on a Linksys EA series router ...
29: .... See below for what to do: [[Hard_reset_or_30/30/30#Hard_Reset_on_ARM_and_other_newer_routers|Hard Re...
36: ==30/30/30 reset==
41: ...ess and hold the reset button on back of unit for 30 seconds - Linksys WAP54G (10,094 bytes)
65: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
72: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
107: ...er, then perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]] on it
115: * Perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]]
132: ...message, perform a [[Hard_reset_or_30/30/30|30/30/30 hard reset]] then try to TFTP the micro build as ... - Linksys WRT54GL (7,215 bytes)
8: *'''CPU''': Broadcom BCM5452 at 200 MHz (130nm process)
14: cpu model : BCM3302 V0.8
55: # Do a [[Hard_reset_or_30/30/30|hard reset]] then login to the Linksys GUI at htt...
90: ...t.com/wiki/index.php/Hard_reset_or_30/30/30 30/30/30] method<br> - Linksys WRT350N (2,519 bytes)
6: *CPU: Broadcom BCM4705 (300 MHz)
16: ... next, such as Mega.bin. Remember to do the 30/30/30 Hard Reset after every successful flash. It is ab...
21: # [[Hard_reset_or_30/30/30|Hard reset]] the router. You will not get a pass... - Linksys WRT54GS v1.1 (1,466 bytes)
7: #Perform a [[Hard_reset_or_30/30/30]] reset
10: #[[Hard_reset_or_30/30/30]] again
21: #Hard Reset 30/30/30
View (previous 20) (next 20) (20 | 50 | 100 | 250 | 500).