Linksys EA6300

From DD-WRT Wiki

Jump to: navigation, search
NOTE: EA6300V1 hardware with an FCC/IC ID suffix of EA6400 is identical to the EA6400: see Linksys EA6400.

This guide covers these very similar models: EA6200, EA6300 (with EA6300 ID), EA6350v1, & EA6350v2.
These use linksys-ea6350/ firmware, but the EA6350v2 requires serial flash. Reference: Supported Devices wiki.

[edit] Hardware Specifications

CPU Broadcom BCM47081A0 800 MHz
Flash ROM Spansion S34ML01G100TF100 128 MB
RAM Hynix H5PS1G63JFR-S6C 128 MB
NVRAM 60KB
2.4 Ghz Radio Broadcom BCM43217 2x2 802.11b/g/n IEEE 802.11b (up to 11Mb/s)

g (up to 54Mb/s)/n (up to 300 Mb/s)

5 Ghz Radio Broadcom BCM4352 2x2 802.11a/b/g/n/ac

& two 5 GHz amplifiers

IEEE 802.11a(up to 54Mb/s)

n (up to 300 Mb/s)

Antenna Location Internal 3
Switch BCM47081A0 (Gigabit) 4x GbE + 1 WAN
USB 1x USB 3.0

[edit] Installation

Read the Firmware FAQ: download links are in the Where do I download firmware? section

EA6300V1 hardware with an FCC/IC ID suffix of EA6400 is identical to the EA6400, but uses linksys-ea6300 firmware.

The following hardware uses linksys-ea6350 firmware: see this EA6350 forum thread.

  • EA6300 hardware (no labeled version) with an FCC/IC ID suffix of EA6300
  • EA6200
  • EA6350v1
  • EA6350v2: this requires serial flash with these instructions