Linksys E1000 v2.0

From DD-WRT Wiki

This is for the E1000v2. For version 1 hardware see Linksys E1000.

[edit] Hardware Specs

• FCC ID: Q87-E1000V2
• Industry Canada ID: 3839A-E1000V2
• CPU: Broadcom BCM5357B0 @300 MHz
• Flash / RAM: 4 MiB / 32 MiB
• Wireless/Ethernet/Switch chip: Broadcom BCM5357B0
• Wireless protocols: bgn
• Wireless MIMO config: 2x2:2
• LAN / WAN: 4 / 1 (up to 100 Mb/s)

[edit] Install Procedure

1. Reference the Linksys E1000 wiki for the general procedure and information
2. NOTE: use the mini_e1000v2.bin trailed build from the broadcom_K26 folder.
   • Minimum build for v2.0 is 16758 and for v2.1 is 16698
   • Do not use older mini_e1000.bin v1 builds which are prior to v2 support
3. For upgrades use any non-trailed and non-nv6xk builds (e.g. K2.6_mini.bin) no bigger than 3712 KB (3801088 bytes)

[edit] Serial Recovery

1. See Serial Recovery in the E1000 wiki

[edit] Reference

Forum threads: Linksys e1000v2 now supported and Linksys E1000 v2.1