From DD-WRT Wiki

You are here: DD-WRT wiki mainpage / LaFonera / Info / Hardware-Specifications

[edit] The Hardware Specifications

[edit] Model 2100

• CPU: Atheros AR531X_COBRA - MIPS 4KEc V6.4 - 183.50 mhz
• RAM: Hynix hy57v281620etp-h - 16 MB
• Flash: ST(84) H - 25P64V6P - MYS 636 - 8 MB
• Ethernet: (1x) Altima AC101 (10/100 Mbit/s) [Auto-MDI(X)]
• Wireless: IEEE 802.11b / 802.11g (up to 54 Mbps)
• Antenna Connector: RP-SMA Connector (Reverse SMA)
• Antenna Omni-Directional detachable antenna (2dBi)
• Dimensions: 93.5 mm x 25.5 mm x 70 mm (excluding antenna)
• Powersupply Input: 100-240V ~ 50-60 Hz 0.3A. Output: 5V DC, 2.0A Output
• Power Consumption: 4 Watt
• Reset Switch

[edit] Model 2200

• CPU: Same as 2100.
• RAM: Same as 2100.
• Flash: Same as 2100.
• Ethernet: Same as 2100?
• Wireless: Same as 2100.
• Antenna Connector: same as 2100.
• Antenna: Same as 2100.
• Dimensions: Same as 2100.
• Powersupply: 7.5v, 1A Output
• Redesigned PCB, possibly cooler?
• No extra pad for a second antenna. Possible internal PCB antenna?
• Serial port on JP1. Pin closest to Ethernet jack is GND, RX, TX, Power. (I may have RX and TX swapped Daemondust 19:19, 26 Apr 2007 (CEST))

(see http://zone-sys.net/fon2200/)

[edit] Model 2100

Environment Requirement

LaFonera complies with the following standards:

• Temperature: IEC* 68-2-14

0 to 40 degrees C (Standard Operating)

0 to 70 degree C (Non-operation)

• Humidity: 5% to 95% (Non-condensing)
• Vibration: IEC 68-2-36, IEC 68-2-6
• Shock: IEC 68-2-29
• Drop: IEC 68-2-32

This device is actually made by Accton Accton Home Page as shown doing a search on Fonera's FCC-ID in the FCC database.

A look at the various test reports and external photos shows that this device is provided also under the Trade(Model) Names

   * ACCTON MR3201A
   * FON FON2100A,B,C and F
   * Edge-Core WA3101
   * Philips SNR6500
   * SMC WEBT-G
   * Siemens Gigaset Wlan repeater 108 

Copies of the mentioned FCC-documents may also be found at http://mobileaccess.de/fonera/

*IEC (International Electrotechnical Commission)

[edit] LaFonera+

LaFonera+ case.

LaFonera+ PCB top.

LaFonera+ PCB bottom.

The latest alliteration of the LaFonera has 2 Ethernet ports, new web interface, and seems to be locked down harder than ever.

• CPU: Unknown, probably same as 2100.
• RAM: 16MB
• Flash: 8MB
• Ethernet: 2 Ethernet ports, one LAN, one WAN.
• Wireless: Unknown, probably same as 2100.
• Antenna Connector: RP-SMA Connector (Reverse SMA)
• Antenna: Omni-Directional detachable antenna (1.5dBi)
• Dimensions: 93.5 mm x 25.5 mm x 110 mm (excluding antenna)
• Powersupply: Unknown
• Redesigned PCB
• PCB has layout and room for? (Probably an USB port)
• Serial port on JP1.
  

1 = GND
2 = Tx
3 = Rx
4 = Vcc
Pin furthest from Ethernet jack is 1.
Serial port is no use according to[1].

• Appears to be a JTAG header below JP1

[edit] References

• http://wiki.openwrt.org/OpenWrtDocs/Hardware/Fon/Fonera Fonera OpenWRT Hardware Docs
• http://zone-sys.net/fon2/ Model 2200 pictures
• French article on the LaFonera+ with internal photos and booting serial port output (english machine translation)